An Unknown Indian

Thoughts of a FOSS enthusiast

Setting up MRTG in Debian

Posted by Balachandran on December 13, 2007

    Hello folks. After some setback, I have managed to setup MRTG in my Debian etch box. I thought of posting the process step by step so that it might be useful to someone someday. MRTG, The Multi Router Traffic Grapher, is used to see what a router does. It displays in the form of clean and pretty graphs showing how much traffic flowed through each interface.

Those using debian etch can save a good deal of download time as all the necessary packages are shipped along with it. But still, for those who want the latest of all the packages, can download them from the respective sites as listed below.

The required packages for running MRTG are mrtg itself and snmp (and ofcourse apache2, properly configured and userdir enabled if necessary. It can be enabled by the command a2enmod userdir). In Debian, users can install them by the following command

#apt-get install snmp snmpd mrtg

These get installed in the default locations. Then, first we need to configure snmpd. For this, check if snmpd is running. This can be done as follows.

#ps -e | grep snmpd

If it is running, it gives an output showing the process id and the name(snmpd) of it.

Then we need to run the command snmpwalk. snmpwalk is an SNMP application that uses SNMP GETNEXT requests to query a network entity for a tree of information. The exact command is:

#snmpwalk -v 1 -c public localhost IP-MIB::ipAdEntIfIndex

To put it simply, the above command queries the SNMP server for the IP addresses of the various interfaces. It will return something like this

IP-MIB::ipAdEntIfIndex.127.0.0.1 = INTEGER: 1
IP-MIB::ipAdEntIfIndex.192.168.1.2 = INTEGER: 2

These are my settings and it will vary for you based on your system’s interface configurations. This can be cross-checked by using /sbin/ifconfig -a. If you don’t get the output like something similar to the above seen one, we need to edit the /etc/snmp/snmpd.conf file and configure the snmp server. Open the file /etc/snmp/smpd.conf with your favorite editor. Then do the following.

Find the line

com2sec <some text> default public/private.

Change it to the following lines.

com2sec local localhost public
com2sec mynetwork 192.168.1.1/2 public

The actual values are based on your network settings. These are the values in my snmpd.conf file. Then in the next few lines below, you will find the following.

group MyROSystem v1 <some text>
group MyROSystem v2c <some text>
group MyROSystem usm <some text>

Replace them with the values that we created above namely, local and mynetwork. So it will look like this:

group MyRWGroup v1 local
group MyRWGroup v2c local
group MyRWGroup usm local
group MyROGroup v1 mynetwork
group MyROGroup v2c mynetwork
group MyROGroup usm mynetwork

Likewise, you will find line like:

view system included .iso.org.dod.internet.mgmt.mib-2.system

Replace it with the following:

view all included .1 80

Infact, most of these will be available in the file by default, you need to comment out the lines other than what are required. In all the places where it has been mentioned to replace on line with another, it is suficient if the unnecessary line is commented out (using # ).

Next, we need to comment ou the following line:

access MyROSystem “” any noauth exact system none none

And ensure that these lines are present:

access MyROGroup “” any noauth exact all none none
access MyRWGroup “” any noauth exact all all none

Finally, find these lines:

syslocation Unknown (edit /etc/snmp/snmpd.conf)
syscontact Root (configure /etc/snmp/snmp.local.conf)

And replace them with appropriate values. syslocation will be followed by the OS youare running and syscontact will be followed by the system administrator and his mail id. It will be like:

syscontact name <mail-id>

Now restart the snmpd if it is already running or start it if it isn’t. It can be done by:

#/etc/init.d/snmpd restart

Then, run the snmpwalk command show above again:

#snmpwalk -v 1 -c public localhost IP-MIB::ipAdEntIfIndex

Now, we need to configure MRTG. It is a really simple task. The commands are as follows.

#mkdir /var/www/mrtg

#cfgmaker –global ‘WorkDir: /var/www/mrtg’ –output /etc/mrtg/mrtg.cfg \ public@localhost

# indexmaker –output=/var/www/mrtg/index.html /etc/mrtg/mymrtg.cfg

The cfgmaker command creates the configurations scripts for MRTG and the indexmaker creates the default index page for the MRTG page. Now to run mrtg,

#mrtg /etc/mrtg/mrtg.cfg

And thats it!!! For the first couple of times it might through out some error messages. Start your favourite browser and view the results

Advertisements

7 Responses to “Setting up MRTG in Debian”

  1. Unixdev said

    Cheap shell accounts [@] http://www.unixdev.us
    or visit us on EFnet/DALnet in #unixdev (there is also a relay setup in the channel between the two networks, so it woulden’t matter which IRC Server you connected to.

  2. Sidharatha said

    Why are you called u itself as Unknown Indian – Balchandran I appreciate all the articles and certain of the articles have solved my plenty of all the problems through ur URL

    With Regards and keep it up

    SIDHARATHA
    Chandigarh India

    • @Sidhartha,

      Thanks and glad to know that this blog helped you solve some problems. As to why I am calling myself an Unknown Indian, India is a great land with more than a billion people, and I am just one in a billion and so still unknown. Also, partly because of the book “The Autobiography od an Unknown Indian” by Nirad Choudhuri. And Thanks for your comments. Will definitely post more useful information

  3. Dale said

    Hi. Thanks for your tips. I just completed the configuration of MRTG this morning and it is now working. i can see now the graphs of the router. I followed some of your tips here.

    TYVM.

  4. Anon said

    Finally, a guide to setup snmp. Thank you! Every other mrtg setup assumed snmp functioned out of the box.

  5. http://bestnaturalhealthsupplements.com said

    I will immediately seize your rss feed as I can not in finding your email subscription link or e-newsletter service. Do you’ve any? Kindly let me recognize in order that I may just subscribe. Thanks.

  6. Hi there, i read your blog occasionally and i own a similar
    one and i was just curious if you get a lot of spam feedback?
    If so how do you prevent it, any plugin or anything you can suggest?
    I get so much lately it’s driving me insane so any help is very much appreciated.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: